|
With
the door panels removed,
we need to take a look
at the door to make sure
our kit is going to fit.
The window opening is 13
1/2 inches tall.
Our power window
regulator has about 20
inches of travel.
That means our regulator
will have more than
enough travel, to raise
and lower the window
completely. We
also take some
measurements between the
glass and the door to
make sure we have at
least an inch of space
for our regulator.
We also need at least 6
inches of space under
the glass for the motor.
There is almost 12
inches between the
bottom of the glass and
the bottom of the door,
so we'll have plenty of
room.
This
is also a good time to
check the interior
workings in the door,
make any necessary
repairs and lubricate
all of the moving parts.
|
